架設串流影音伺服器HelixServer 11 for Linux
所需檔案可由本站下載
訪客無法瀏覽此圖片或連結，請先 註冊 或 登入會員 。
解壓縮後，將整個資料夾上傳至伺服器上，準備安裝。
(上傳到哪裡倒是無所謂，安裝時會指定安裝路徑)
一、利用FTP軟體將整個資料夾上傳至SERVER上
我的作法是傳到/root/helixserver
二、安裝，先用SSH軟體登入主機
以下紅色部分代表指令
cd helixserver/
ls
應該會有下面檔案
crack HelixAdministrator setup.tar.gz
將setup.tar.gz解壓縮
tar xzvf setup.tar.gz
修改權限
chmod +x helix-server-retail-11.01-rhel4-setup.bin
執行安裝
./helix-server-retail-11.01-rhel4-setup.bin
以下是安裝過程
Extracting files for Helix installation........................
Welcome to the Helix Server 11.0 (11.0.1.1884) Setup for UNIX
Setup will help you get Helix Server running on your computer.
[ Press [Enter] to continue... ] [按[Enter]繼續 ]
If a Helix Server license key file has been sent to you,
please enter its directory path below. If you have not
received a Helix Server license key file, then this server
WILL NOT OPERATE until a license key file is placed in
the server's License directory. Please obtain a free
Basic Helix Server license or purchase a commercial license
from our website at
訪客無法瀏覽此圖片或連結，請先 註冊 或 登入會員 。 If you need
further assistance, please visit our on-line support area
at
訪客無法瀏覽此圖片或連結，請先 註冊 或 登入會員 。
License Key File: []: [ 這裡是要許可證檔案，先不管，事後再補。按[Enter]繼續 ]
Installation and use of Helix Server requires
acceptance of the following terms and conditions:
Press [Enter] to display the license text... [ 按[Enter]，是授權書，有興趣可以讀一讀^_^... ]
Choose "Accept" to accept the terms of this
license agreement and continue with Helix Server setup.
If you do not accept these terms, enter "No"
and installation of Helix Server will be cancelled.
I accept the above license: [Accept]: [ 此處按[Enter]即可 ]
Enter the complete path to the directory where you want
Helix Server to be installed. You must specify the full
pathname of the directory and have write privileges to
the chosen directory.
Directory: [/root/helixserver]: /usr/helixserver [ 自己設定安裝路徑 ]
Please enter a username and password that you will use
to access the web-based Helix Server Administrator and monitor.
Username []: [ 鍵入管理人員帳號 ]
Password []: [ 設置密碼 ]
Confirm Password []:[ 再按一次密碼 ]
Please enter a port on which Helix Server will listen for
RTSP connections. These connections have URLs that begin
with "rtsp://"
Port [554]:[ 此處按[Enter]即可 ]
Please enter a port on which Helix Server will listen for
HTTP connections. These connections have URLs that begin
with "http://"
Port [80]:8080 [ 更改http傳輸PORT,為避免和apache衝突,建議更改 ]
Please enter a port on which Helix Server will listen for
MMS connections. These connections have URLs that begin
with "mms://"
Port [1755]:[ 此處按[Enter]即可 ]
Helix Server will listen for Administrator requests on the
port shown. This port has been initialized to a random value
for security. Please verify now that this pre-assigned port
will not interfere with ports already in use on your system;
you can change it if necessary.
Port [11012]:11111 [ 更改管理員進入管理的PORT，系統會隨機取,請更改容易記得 ]
You have selected the following Helix Server configuration:
Admin User/Password: traveller2/****
Encoder User/Password: traveller2/****
Monitor Password: ****
RTSP Port: 554
HTTP Port: 8080
MMS Port: 1755
Admin Port: 11111
Destination: /usr/helixserver
Enter [F]inish to begin copying files, or [P]revious to go
back to the previous prompts: [F]:
[ 如果以上設置沒有意見，按[Enter]即可 ,否則按P重新設置 ]
Copying Helix Server files....
Helix Server installation is complete.
If at any time you should require technical
assistance, please visit our on-line support area
at
訪客無法瀏覽此圖片或連結，請先 註冊 或 登入會員 。
Cleaning up installation files...
Done.
[ 安裝完成]
現在將許可證檔案複製過去
cp crack/DistributedLicensing.lic /usr/helixserver/License/
接下來是中文化的過程，不過是簡體字
可以自己考慮要不要中文化
先將英文語系備份
mv /usr/helixserver/HelixAdministrator /usr/helixserver/HelixAdministrator_en
將中文語系複製過去
cp -a HelixAdministrator/ /usr/helixserver/HelixAdministrator/
中文化完成
啟動服務
cd /usr/helixserver
./Bin/rmserver rmserver.cfg &
利用瀏覽器登入管理
在網址列上鍵入
訪客無法瀏覽此圖片或連結，請先 註冊 或 登入會員 。 IP:11111/admin/index.html
就可以登入管理
