[轉貼][教學]BT錯誤碼解釋
BT 錯誤碼解釋
使用BT過程中出現紅字錯誤後不必退出，BT會自動重試
（無論這種情況是出現在開始還是下載過程中）
~
另外注意錯誤的時間，如果距現在已經超過2 分鐘，恰恰說明現在是正常的。
（BT不會自動清除過期的錯誤）
~
I. A piece failed hash chech， re-downloading it
這並不是什麼壞消息，你不用理會它.意思是告訴你，
你下載的檔有一部分是壞的，bt會自動幫你重新下載
錯誤的部分.導致這個錯誤的大多數原因在於某些人錯
誤的使用了"跳過hash 檢查"這個選項 ~
II.bad data from tracker -
通常你不必理會它，通常是tracker 伺服器超載或者down了~
III.Problem connecting to tracker - timeout exceeded
Problem connecting to tracker - HTTP Error 503: Connect failed
Problem connecting to tracker - [Errno socket error] (10061，
"Connection refused" )
Problem connecting to tracker - (111， `Connection refused`)
說明在連接tracker 伺服器過程中出現錯誤，有可能tracker
伺服器超載或者down了，這時並不要心急，等待BT 自動重試
如果很長時間都沒有反映的話，你可以加上"--http_timeout
120"的參數來加大連接重試時間.具體做法另文說明 ~
IV.Problem connecting to tracker - HTTP Error 400: Not Authorized
說明這個tracker 伺服器不允許你使用這個torrent
檔(國內好像比較少見)，有些tracker伺服器只允許
在他們自己網站上發佈的torrent 才允許下載
解決只有換一個torrent檔了 ~
V.Problem connecting to tracker - HTTP Error 404: Not Found
很簡單，torrent 檔在tracker 伺服器上已經找不到了，找個新的吧 ~
VI.Problem connecting to tracker - HTTP Error 407:
Proxy Authentication Required
假如你用的是代理下載BT，說明這個代理需要驗證，需要你輸入用戶名和密碼.~
VII.Problem getting response info - [Errno 2]
No such file or directory: "C:\\Documents and Sett..."
在某些情況下，IE 有可能沒把torrent 檔存在暫存檔案夾內
解決方法是在torrent 文件下載位址上按右鍵，然後另存到硬碟的某處
(這可是個好習慣，以後你求種子或者reseed 的時候特別有用，
建議大家都這麼幹，利己利人)，
然後雙擊這個torrent 檔開始下載.如果出現這個問題，
建議清理你的IE暫存，在檔中如果出現"["或者"]"也會出現這個問題
以下是其中包含了最常見的TCP/IP error
已加上中文註解,希望對大家遇到的問題有幫助.
如果tracker不穩定或繁忙中,可以稍等再看問題情況(
如10060: error,如果等15分鐘問題仍在,很可能
*.torrent檔已經過期或者無效)
// tcp/ip error list
case 10004: error = "Interrupted system call 中斷的系統呼叫"; break;
case 10009: error = "Bad file number"; break;
case 10013: error = "Permission denied 進入被拒絕"; break;
case 10014: error = "Bad address"; break;
case 10022: error = "Invalid argument (not bind)"; break;
case 10024: error = "Too many open files"; break;
case 10035: error = "Operation would block"; break;
case 10036: error = "Operation now in progress"; break;
case 10037: error = "Operation already in progress"; break;
case 10038: error = "Socket operation on non-socket"; break;
case 10039: error = "Destination address required"; break;
case 10040: error = "Message too long"; break;
case 10041: error = "Protocol wrong type for socket"; break;
case 10042: error = "Bad protocol option"; break;
case 10043: error = "Protocol not supported "不支援的protocol"; break;
case 10044: error = "Socket type not supported"; break;
case 10045: error = "Operation not supported on socket"; break;
case 10046: error = "Protocol family not supported"; break;
case 10047: error = "Address family not supported by protocol family"; break;
case 10048: error = "Address already in use socket使用中"; break;
case 10049: error = "Can't assign requested address"; break;
case 10050: error = "Network is down"; break;
case 10051: error = "Network is unreachable"; break;
case 10052: error = "Net dropped connection or reset"; break;
case 10053: error = "Software caused connection abort"; break;
case 10054: error = "Connection reset by peer 連接被防火檣或proxy中斷"; break;
case 10055: error = "No buffer space available Tracker的buffer已滿"; break;
case 10056: error = "Socket is already connected"; break;
case 10057: error = "Socket is not connected"; break;
case 10058: error = "Can't send after socket shutdown"; break;
case 10059: error = "Too many references, can't splice"; break;
case 10060: error = "Connection timed out 與Tracker連線超時"; break;
case 10061: error = "Connection refused Tracker否決連接"; break;
case 10062: error = "Too many levels of symbolic links"; break;
case 10063: error = "File name too long 檔案名過長或含無效的字完"; break;
case 10064: error = "Host is down"; break;
case 10065: error = "No Route to Host"; break;
case 10066: error = "Directory not empty"; break;
case 10067: error = "Too many processes"; break;
case 10068: error = "Too many users 太多使用者"; break;
case 10069: error = "Disc Quota Exceeded"; break;
case 10070: error = "Stale NFS file handle"; break;
case 10091: error = "Network SubSystem is unavailable"; break;
case 10092: error = "WINSOCK DLL Version out of range window的winsock.dll問題";
break;
case 10093: error = "Successful WSASTARTUP not yet performed"; break;
case 10071: error = "Too many levels of remote in path"; break;
case 11001: error = "Host not found"; break;
case 11002: error = "Non-Authoritative Host not found"; break;
case 11003: error = "Non-Recoverable errors: formERR, REFUSED, NOTIMP"; break;
case 11004: error = "Valid name, no data record of requested type"; break;
最常見就是10060跟10061
超過15分還是一樣
那就是過期了或是無效了
就別再試了
[ 本帖最後由 philxyz0316 於 2006-6-25 18:49 編輯 ]
